Showing posts with label lumber. Show all posts
Showing posts with label lumber. Show all posts

Wednesday, April 8, 2009

Starting to look like a shop!

Our first delivery of wood came on Monday. We didn't want to leave a bunch of wood sitting around too long (avoiding warpage), so this load mainly consisted of what we'll need for the floor and the front wall framing - some 2x4s, 2x6s, 1x4 fir tongue and groove for the floor and some plywood.



Then on Wednesday evening I gave Arlene an early birthday present.



After talking to several folks about the benefits of screws vs nails for framing, we went with ring-shank nails. Apparently screws will hold better than regular nails, but tend to snap under shearing loads. Nails are more likely to bend, but could wiggle out over time if we move the trailer frequently. Ring shank nails are a compromise between the two and have the added advantage of speed (with Arlene's new toy).

In general, I tend to assume that everything takes longer to do than you initially think it will. Since we have a deadline for our project (July / August), some of our choices reflect an interest in speed. For example, I've read several times that folks found used trailers for sale on the net. When we really started looking for a used one there were none available, so we bought the one we have. If we had more time and were willing to wait for the right sized trailer to become available, we could have saved anywhere from $1,000 to $2,000. But we also thought that a used trailer could have rust, need rewiring, break work or other problems that would take us time and money too.

As it is, there are several modifications we need to make to our trailer before we can build and put the floor framing on. In fact, the Fencl plans give a general idea of the floor framing, but indicate that modifications will be needed depending on the trailer. Our trailer is different enough from the basic plans that we'll need to employ some creative problem solving...

Saturday, March 28, 2009

At the lumber yard

On April 1st, California will hike its sales tax by 1 whole percent. So it has made sense to do some spending up front. To that end, we've spent the last few days spending money. We've purchased a hot water heater, a refrigerator, a heater, scissor jacks and a toilet. We've been getting bids on other building supplies, like insulation, windows, aluminum flashing, PEX piping, sealant and on and on and on. We should have our order in for these items early next week, for delivery at the end of the week.

Today we went to the lumber yard. I love wood. Good quality wood with beautiful grain... I see exotic woods and I want to incorporate them into our house. How about a teak floor? Birds eye maple cabinets? Trim in ebony? Ok. Maybe not that combination. Anyway, we need to watch our weight. We're hoping to build a mobile house, remember?



But we're also interested in avoiding the formaldehyde that off gasses from plywood and particle board. So we need to use light weight, quality, solid wood materials for the inside of the house. (We will use exterior grade plywood for the sheathing that goes outside of the framing.) We can do this by using 1/4" tongue and groove for the walls and ceiling and 3/4" tongue and groove for the floor. So we just have to settle on the type of wood. And these are big decisions because we both want our place to be beautiful.

But we don't have to make all of the decisions right now. As you might expect, we'll be building from the bottom up, so we need to decide on the materials for the foundation and floor now. By this last statement it is probably apparent that we don't plan to buy all the wood right away, even though we could avoid that 1% tax increase if we did. For the wood, we'll order as needed so we don't have wood sitting around that could warp on us. Plus, we figure we'll have less waste this way.

So what's next? We have to finalize some orders, move a bunch of tools from storage to the build space, get a trailer... ah. The trailer. It is the foundation of our home. Well, more on that later.