Tuesday, May 5, 2009

Floor Finishing - Part 1 of 2

We’ve put the floor finish on hold temporarily so that I can do more research.

I'd already found a couple of products that we could use but then a professional floorer we met this weekend highly suggested using Watco Danish Oil with a covering of Minwax Finishing Wax for a really great finish. He also explained that if we ever get a big scratch or dings that we’d simply sand the area, reapply the finishes and the marks would have disappeared. Well, yesterday I looked up the products and the MSDS said it wasn’t all that healthy to apply. We have no idea if the stuff will outgas, and if so for how long, so we’re back to looking for all natural products.

Since our cottage will be mobile, our needs are possibly different than what a stationary house can use. What we’ve decided so far is that we need a finish that is:

No VOC
Water resistant
Flexible
Matte finish and a
Natural color

We aren’t yet sure what products we’ll choose but we’re leaning toward using an oil then a wax finish. The oil I like best so far is Bioshield Primer Oil. The write up describes it as a “deeply penetrating wood primer/sealer that creates and elastic, breathable…wood-grain enhancing surface…easy application…with superior water-resistant qualities.” Bioshield Penetrating Oil Sealer also looks like an option though it doesn’t specifically mention elastic, breathable or water-resistant.

Although Douglas fir a very soft wood, for the wax I’m thinking we should steer clear of anything with carnuba wax in it. I’ve read that it is a ‘hard wax that will continue to harden as it ages’ which sounds really great for a soft wood floor in a stationary house, but will it make our floor splinter when we move our cottage again later?

Since I need to complete the floor finish research, but don’t want to hold up construction progress, last night I put down a protective cover on the floor so that I can move on to wall framing. I duct taped together 4’x8’ sheets of masonite to protect our sanded wood floor from dings, dirt and scrapes as we attach the wall framing. Mike, a friend who has built his own home, professionally redone others’ (and also beautifully rebuilds antique cars piece by tiny piece), says that the construction industry uses thermoply to protect floors then throws it away. We didn't see a product with that name at our local home improvement store but we guess it's similar to masonite. We’ll either find another use for the stuff after it’s done its job on our floor or it will be posted on Freecycle since it will still be usable.


Have you ever used a No VOC finish for floors that is water-resistant and possibly flexible? What are your thoughts on our floor finish needing to be flexible?

7 comments:

  1. Thanks so much for posting your progress on here, it is helpful and enjoyable. I am currently rebuilding a bread van into a small cabin, and plan on building a home on wheels in the relatively near future. I would recommend you guys look into OSMO Polyx oil. Here is a link with more information, http://www.environmentalhomecenter.com/shop.mv?CatCode=PRODUCT&ProdCode=OS_HARDWAX_OIL
    I have not used it myself but some friends recently used it to finish their new floors and have been very happy. I think since it is not a plastic finish, and instead a more breathable wax finish that it would not have issues with slight flexing, but that is just conjecture. Supposed to be one of the more non-toxic routes.
    Good luck with all your endeavors and keep posting.
    LebnJay

    ReplyDelete
  2. LebnJay,

    I will definitely check into the Polyx Oil.

    Thanks for the tip and good luck on your bread van cabin. Although you aren't customizing a school bus, I've found some of our problems answered on http://www.skoolie.net/forum/. Maybe you'll find some useful info there too.

    Is there any way that we can see your progress as well? Your project sounds very interesting!

    Arlene

    ReplyDelete
  3. here's an article that might help

    http://www.taunton.com/finewoodworking/pages/w00060.asp

    boiled linseed oil followed by wax might work well, but it's not a particularly hard wearing finish.

    Justin.

    ReplyDelete
  4. Oh, and this one too

    http://www.popularwoodworking.com/features/finish2.html

    ReplyDelete
  5. Justin,

    Both of those links look like they have information that we can use.

    Thanks!
    Arlene

    ReplyDelete
  6. I read a book once that had recipies for waxed floors. The simplest was bees wax, melted slowly over a stove and rubbed into the floor. The suggested that you could melt beeswax and carnuba together to vary the durability. I haven't tried this, so YMMV.

    ReplyDelete
  7. Thanks for the tip Beach Bum! We'll check it out.

    ReplyDelete

Leave us a comment! We'd love to hear from you!